4 Tap Super Slim T-Bar Font Kit (Pre-Assembled)

4 Tap Super Slim T-Bar Font Kit (Pre-Assembled) is a streamlined four-tap beer font designed for brewers who want a clean, modern look without the bulk of a wider T-bar tower. Its brushed stainless steel body takes up less visual space while still providing a practical four-line dispensing setup.

The font arrives pre-assembled with EVABarrier beverage lines already installed through each tap shank. This reduces setup time and removes much of the difficulty associated with feeding multiple lines through a narrow font.

It is best paired with compatible NukaTap SS taps and is well suited to KegLand Series X.1, X Plus and Grand Deluxe Kegerators.

Sleek Super Slim Design

The slimline shape gives the font a lighter and more modern appearance than a traditional wide T-bar.

This makes it a good choice for:

• Home bars
• Compact kegerator installations
• Bench-mounted beer systems
• Alfresco serving areas
• Multi-tap keezer builds
• Modern entertainment spaces
• Brewers wanting a minimal visual footprint

The brushed stainless steel finish is durable, easy to clean and designed to match many common kegerator and bar components.

Pre-Installed EVABarrier Beverage Lines

Each tap shank includes approximately 2.15 metres of pre-installed 4mm x 8mm EVABarrier beverage line.

Pre-installed lines provide several benefits:

• Faster assembly
• Less time feeding tubing through the font
• Consistent line length across all taps
• Reduced risk of kinks during installation
• Cleaner internal layout
• Easier system setup

EVABarrier tubing is commonly used in home draught systems because it provides a low-permeability beverage path and works well with compatible Duotight push-fit fittings.

Do not shorten the beverage lines until the system has been tested at normal serving temperature and pressure. Excessively short lines can cause fast, foamy pours.

Serve Four Kegged Beverages

The 4 Tap Super Slim T-Bar Font Kit (Pre-Assembled) supports four separate beverage lines.

Possible serving combinations include:

• Lager, pale ale, IPA and stout
• Beer, cider, ginger beer and sparkling water
• Four different homebrew batches
• Seasonal beers and regular favourites
• Alcoholic and non-alcoholic beverages
• Tasting flights and party setups

Each beverage may require different gas pressure, carbonation and line-balancing adjustments.

What Is Included

The kit includes:

• 1 x 4 Tap Super Slim T-Bar font
• 1 x dust cover cap
• Pre-installed 2.15m lengths of 4mm x 8mm EVABarrier beverage line for each tap shank
• 4 x auto-close springs for NukaTap Slim Fonts
• 1 x rubber font gasket
• 3 x 8mm Duotight equal tee gas splitters
• 4 x long slender black tap handles
• 1 x cut set of red 5mm x 8mm EVABarrier gas line
• 1 x set of four font mounting screws
• 1 x 7-in-1 spanner and wrench tool

Taps are not listed as included. The font is best paired with compatible NukaTap SS taps, including the recommended KegLand model where available.

Auto-Close Tap Springs

Four auto-close springs are supplied for compatible NukaTap Slim Font installations.

These springs help return the tap handle to the closed position after use. This may reduce accidental spills and can be useful in busy home bars or entertainment spaces.

Check tap compatibility before fitting the springs.

Gas Distribution Components

Three 8mm Duotight equal tee splitters and a cut length of red EVABarrier gas line are included.

These parts can be used to distribute gas through a multi-keg system. However, the final setup will depend on the number of kegs, regulator type and whether each keg requires the same serving pressure.

For systems serving beverages at different pressures, a secondary regulator or individual pressure-control device may be required.

Always check gas connections for leaks before operating the system.

Compatible Kegerators

This font is suited to:

• KegLand Series X.1 Kegerators
• KegLand X Plus Kegerators
• Grand Deluxe Kegerators
• Compatible custom kegerator builds
• Suitable keezer and bar installations

The font may also fit other systems where the mounting pattern, available clearance and drip tray dimensions are compatible.

Measure carefully before drilling or modifying a cabinet or benchtop.

Dimensions

• Width: 358mm
• Height: 410mm
• Outside diameter: 1 inch

The font is suitable for standard kegerator drip trays as well as many stainless steel wrap-around and flat drip tray models.

Check the distance between the tap outlets and drip tray to confirm adequate glass clearance.

Mounting the Font

The supplied rubber gasket and mounting screws help secure the font to a suitable surface.

A general mounting process includes:

1. Choose a stable installation location.
2. Check for hidden cooling lines, wiring or structural components.
3. Confirm the mounting-hole position.
4. Place the rubber gasket beneath the font base.
5. Feed beverage and gas lines through the mounting opening.
6. Secure the font with the supplied screws.
7. Fit compatible taps and handles.
8. Connect the beverage and gas lines.
9. Check all connections before use.

When mounting to a kegerator, use only the approved font location. Drilling into an unapproved area can damage refrigeration components.

Best Paired with NukaTap SS Taps

The font is designed to pair with NukaTap SS taps for a clean stainless steel dispensing setup.

Potential benefits include:

• Stainless steel beverage-contact surfaces
• Smooth pouring performance
• Durable construction
• Easy cleaning
• Modern appearance
• Compatibility with the included auto-close springs

Confirm the required tap and shank compatibility before installation.

Beer Line Balancing

A balanced draught system helps control flow and foam.

Pouring performance depends on:

• Keg temperature
• Serving pressure
• Carbonation level
• Beverage line length
• Internal line diameter
• Tap height
• Beverage type

The pre-installed 2.15m beverage lines provide a useful starting point for many common beer setups.

Test each line before cutting. Shorten only in small increments if required.

Cleaning and Maintenance

Clean all beverage-contact parts before first use and regularly thereafter.

Clean the system:

• Between beverage changes
• After each keg empties
• After serving sweet drinks
• Before extended storage
• Whenever flavour or pouring performance declines

Inspect:

• EVABarrier tubing
• Duotight fittings
• Tap seals
• Gas connections
• Mounting screws
• Rubber gasket
• Auto-close springs

Replace worn or damaged components promptly.

Tips for Better Performance

For smoother pours:

• Chill all kegs fully
• Keep the font and beverage lines cool
• Use the correct serving pressure
• Avoid cutting lines too short
• Open taps fully when pouring
• Keep taps and lines clean
• Check all push-fit connections
• Balance each beverage separately
• Use suitable gas control equipment

Warm beverage lines and taps can cause excess foam during the first pour. Font cooling may improve performance in warm environments.

Important Notes

• NukaTap SS taps are not included unless stated separately.
• Kegs, gas cylinder and regulator are not included.
• Confirm tap compatibility before installation.
• Do not drill into hidden refrigeration lines.
• Check all Duotight connections for correct insertion.
• Additional gas distribution parts may be required.
• Clean and sanitise all beverage-contact components before use.
• Final compatibility depends on mounting dimensions and clearance.

4 Tap Super Slim T-Bar Font Kit (Pre-Assembled) is an excellent upgrade for brewers who want a clean four-tap presentation with less visual bulk. Its pre-installed EVABarrier lines, included hardware and slim brushed stainless design make it a practical choice for modern kegerators and custom draught systems.