60L FermZilla All Rounder Pressure Brewing Kit

This particular kit is a one-click option for those who want to be able to brew under pressure with a 60L All Rounder FermZilla.

This brewing kit has been put together by those who want all the benefits of an affordable pressurisable fermentation/transfer vessel, but don’t want the extended cleaning times that one would normally do with a Conical FermZilla. That isn’t to say that this is better than the others, it is simply the best All Round solution for one with a busy life schedule who also wants to brew the absolute best that they can.

This is a very good starting point for those who are just getting into pressurisable fermenters and want to know what we would recommend to use with them. Pressure fermentation opens up a world of possibilites for the homebrewer wanting to take their beers to the next level. If you are kegging then the ability to do a closed pressure transfer straight into a keg is worth the cost of entry!

What we have inside this kit is:
1 x KL15196 60L All Rounder FermZilla Base Kit
 
1 x KL13567 FermZilla Nylon Web Strapping
1 x KL10788 Red Carbonation Caps (We use these as Gas posts)
1 x KL10788-Yellow Yellow Carbonation Caps (For Liquid Posts)
1 x KL17060 Stainless Steel Float with 100cm Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth)
1 x KL15042 BlowTie Integrated Spunding Valve Kit
1 x  0-15psi Integrated Blow Tie Spunding Valve 
1 x KL20756 duotight 8mm x Gas Ball Lock Disconnect
1 x KL18012 8mm Rigid Joiner Tube

 We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the

If you want a smaller model we also have the FermZilla 30L All Rounder too.