BrewMaster Beer Line Cleaner 500ml
BrewMaster Beer Line Cleaner 500ml is a powerful alkaline cleaner designed for beer lines, kegs, taps and dispensing equipment.
It helps dissolve yeast, beer stone and protein deposits that can build up inside your system and affect flavour, aroma and pouring performance. Suitable for home bars, kegerators and commercial beer setups.
- Cleans beer lines and kegs
- Helps remove yeast and beer stone
- Breaks down protein deposits
- Suitable for kegerators and home bars
- Concentrated 500ml formula
- Makes up to five 2-litre cleaning solutions
- Gloves must be worn during use
$9.95
In stock
BrewMaster Beer Line Cleaner 500ml is a concentrated alkaline cleaning solution recommended for maintaining beer lines, kegs, taps and dispensing equipment.
Over time, yeast, beer stone and protein deposits can collect inside beer lines and keg systems. These residues may affect beer flavour, create unwanted aromas and contribute to inconsistent pours. Regular cleaning helps keep the system hygienic and supports better-tasting beer.
This cleaner is suitable for home brewers, kegerator owners, home bars and commercial dispensing systems. Its concentrated formula makes it easy to prepare an effective cleaning solution whenever your beer lines require maintenance.
Why Clean Beer Lines Regularly?
Beer lines come into direct contact with finished beer. Therefore, residue can build up even when the system appears clean from the outside.
Regular cleaning may help:
- Remove yeast residue
- Dissolve beer stone
- Break down protein deposits
- Reduce unwanted flavours
- Maintain cleaner pours
- Support reliable dispensing
- Keep taps and lines in better condition
Cleaning frequency will depend on how often the system is used, the type of beverage dispensed and how long beer remains in the lines.
Mixing Instructions
Always wear suitable protective gloves before handling the cleaner.
To prepare the cleaning solution:
- Measure 100ml of BrewMaster Beer Line Cleaner.
- Add it to 2 litres of hot water.
- Mix carefully until evenly combined.
- Do not use the solution without suitable gloves.
- Avoid splashing the cleaner onto skin, clothing or surrounding surfaces.
The 500ml bottle makes approximately five 2-litre cleaning solutions when mixed at the recommended rate.
How to Clean Beer Lines
Follow these steps:
- Disconnect the keg or beverage source from the dispensing system.
- Prepare 100ml of cleaner in 2 litres of hot water.
- Run approximately half of the prepared solution through the beer line.
- Stop the flow and allow the solution to soak inside the line for 5–10 minutes.
- Run the remaining cleaning solution through the system.
- Rinse the beer line thoroughly with warm water.
- Continue flushing until all cleaning solution has been removed.
- Reconnect the beverage source only after the system has been fully rinsed.
Never leave cleaning solution inside the line when reconnecting beer or another beverage.
Cleaning Kegs and Components
The prepared solution may also be used for suitable keg and dispensing components.
For best results:
- Remove loose parts where practical
- Soak compatible components in the prepared solution
- Allow time for residue to soften
- Rinse every item thoroughly with warm water
- Inspect seals, posts and fittings before reassembly
Do not assume every material is compatible with alkaline cleaners. Check the manufacturer’s instructions for your keg, tap, disconnect, pump or cleaning equipment before use.
Suitable Applications
BrewMaster Beer Line Cleaner 500ml is suitable for cleaning:
- Beer lines
- Cornelius-style kegs
- Kegerator systems
- Beer taps
- Faucet components
- Liquid disconnects
- Home bar systems
- Suitable commercial dispensing equipment
It may also be used with compatible beer line cleaning bottles, hand pumps and recirculating cleaning setups.
Important Safety Information
This product contains alkaline salts and must be handled carefully.
Always:
- Wear protective gloves
- Keep the product away from children
- Avoid contact with skin and eyes
- Avoid breathing splashes or mist
- Use in a well-ventilated area
- Follow the product label
- Rinse cleaned equipment thoroughly
- Store the bottle upright with the cap secured
Do not consume this product. Do not mix it with acids, sanitisers, bleach or other cleaning chemicals.
If accidental contact occurs, follow the first-aid directions on the product label and seek medical advice where required.
Cleaner or Sanitiser?
This product is designed to remove deposits and residue from beer dispensing equipment.
Cleaning and sanitising are different processes:
- A cleaner removes visible and invisible organic deposits.
- A sanitiser reduces microorganisms on an already clean surface.
Where sanitising is required, first clean the equipment thoroughly. Then use a suitable brewing sanitiser according to its separate instructions.
Do not mix cleaner and sanitiser together.
Ingredients
- Alkaline Salts: 25%
Product Size
- Bottle size: 500ml
- Recommended dilution: 100ml per 2 litres of hot water
- Approximate yield: Five 2-litre cleaning solutions
BrewMaster Beer Line Cleaner 500ml provides a practical way to remove yeast, beer stone and protein deposits from beer lines and keg systems. Regular use supports cleaner equipment, fresher flavour and more consistent pours across home and commercial dispensing setups.
