Glass Rinsing Drip Tray 460mm x 180mm

Glass Rinsing Drip Tray 460mm x 180mm is a practical upgrade for home bars, kegerators and custom draught systems where clean glassware and tidy pouring areas matter.

The tray combines a wide stainless steel drip surface with a push-activated rinsing jet. Simply press an upside-down glass onto the rinsing platform to release a quick spray of clean cold water.

This helps remove dust, loose debris and detergent residue immediately before pouring, which can improve foam stability, head retention and the overall appearance of the finished drink.

Push-Activated Glass Rinser

The integrated rinser operates when a glass is pressed down on the platform.

This makes it quick and easy to prepare glassware before serving:

1. Hold the glass upside down.
2. Press it firmly onto the rinsing platform.
3. Allow the jet to spray the inside of the glass.
4. Lift the glass away.
5. Pour the beverage immediately.

A short cold-water rinse can help remove invisible soap film and other residue that may interfere with the pour.

Why Rinse Glassware Before Pouring?

Even glassware that appears clean may still contain:

• Dust
• Small particles
• Dishwashing residue
• Drying marks
• Fibres from towels
• Grease or fingerprints

These contaminants can affect how foam forms and how long the head remains on beer.

Using the Glass Rinsing Drip Tray 460mm x 180mm directly before pouring helps create a cleaner internal glass surface and can improve presentation.

304 Stainless Steel Construction

The tray is made from 304 stainless steel for durability, corrosion resistance and a professional appearance.

Stainless steel is well suited to bar and beverage service areas because it is:

• Easy to clean
• Resistant to moisture
• Durable under regular use
• Less likely to absorb odours
• Well matched with stainless fonts and taps
• Suitable for permanent and semi-permanent installations

Clean the tray with a soft cloth or non-abrasive sponge. Avoid steel wool and harsh abrasive pads.

Water Supply Options

The rinser can be connected to:

• A pressurised water keg
• A suitable mains water supply
• A regulated dedicated water line
• Other compatible clean-water systems

For best performance, supply clean cold water at a pressure between 15 and 60psi.

If connecting directly to mains water, an inline regulator is recommended where necessary to reduce pressure to a suitable operating range.

Recommended Water Pressure

The recommended supply pressure is:

• Minimum: 15psi
• Maximum: 60psi

Pressure that is too low may produce a weak rinse.

Pressure that is too high may create excessive splash, unnecessary water use or stress on the fittings.

Check the supply pressure before connecting the rinser.

Pre-Plumbed Drain Outlet

The drip tray includes a pre-plumbed drain outlet that can be connected to:

• A nearby bucket
• A waste container
• A sink drain
• A suitable waste line

This allows rinse water and beverage drips to flow away from the tray rather than collecting in the base.

Plan the drain path before installation and make sure the hose runs downward without sharp bends or restrictions.

Product Specifications

• Tray dimensions: 460mm x 180mm x 30mm
• Imperial tray dimensions: approximately 18.1 x 7.1 x 1.2 inches
• Glass rinser diameter: 107.95mm
• Imperial rinser diameter: approximately 4.25 inches
• Water inlet: 6.35mm or 1/4-inch outside diameter
• Drain outlet: 12.7mm or 1/2-inch outside diameter
• Material: 304 stainless steel
• Recommended water pressure: 15 to 60psi

Check fitting and tubing compatibility before installation.

Suitable for Home Bars and Kegerators

This tray is well suited to:

• Home kegerators
• Custom home bars
• Keezer builds
• Beer font installations
• Alfresco serving areas
• Tasting spaces
• Small hospitality setups
• Multi-tap beverage systems

Its wide tray provides useful coverage beneath several taps while also creating a convenient rinsing station.

General Installation Guide

Installation requirements vary depending on the bench, bar and water source.

A typical process may include:

1. Choose a suitable installation position.
2. Confirm clearance beneath the bench.
3. Plan the water inlet route.
4. Plan the drain hose route.
5. Secure the tray or place it into the prepared opening.
6. Connect compatible tubing to the water inlet.
7. Connect the drain outlet to a bucket or waste line.
8. Install an inline regulator if required.
9. Turn on the water supply slowly.
10. Check all connections for leaks.
11. Test the rinsing jet.
12. Adjust the water pressure if needed.

A plumber may be required for permanent mains-water installations.

Mains Water Connection

When connecting to a mains water supply:

• Use clean potable water
• Check the available pressure
• Fit an inline regulator where required
• Use compatible food-grade tubing
• Install suitable isolation hardware
• Check local plumbing requirements
• Leak-test the complete system

Do not connect the rinser to an unregulated supply above the recommended pressure.

Pressurised Water Keg Setup

A pressurised water keg offers a practical option where permanent plumbing is unavailable.

A typical setup may include:

• Clean water keg
• Gas cylinder
• Gas regulator
• Water-safe beverage line
• Compatible disconnects
• Rinser inlet connection

This approach may suit portable bars, temporary installations or areas where a mains water line is not available.

Drainage Setup

The 12.7mm drain outlet should be routed to a suitable waste location.

For reliable drainage:

• Keep the hose below the tray outlet
• Avoid tight bends
• Avoid crushed tubing
• Keep the line as short as practical
• Empty waste containers regularly
• Check for blockages
• Secure the hose during use

A poorly routed drain may cause water to pool in the tray.

Improving Beer Presentation

A clean, cold-rinsed glass can help improve:

• Foam formation
• Head retention
• Lacing
• Clarity
• Overall visual presentation
• Consistency between pours

The rinser does not replace proper glass washing. Glasses should still be thoroughly cleaned before use.

The quick rinse is a final preparation step immediately before pouring.

Suitable Glassware

The 107.95mm rinsing platform can be used with many standard glasses, including:

• Pint glasses
• Schooners
• Beer mugs
• Stemmed beer glasses
• Cider glasses
• Soft drink glasses
• Some cocktail glasses

Check that the rim and base shape can be safely pressed onto the platform.

Do not force delicate or unusually shaped glassware onto the rinser.

Cleaning and Maintenance

Clean the tray and rinser regularly.

Recommended maintenance includes:

• Rinsing the tray after use
• Wiping the stainless surface
• Removing beverage residue
• Checking the rinser jet for blockage
• Inspecting tubing and fittings
• Flushing the water line
• Cleaning the drain hose
• Checking all seals for leaks

Sweet drinks and beer residue should be removed promptly.

Stainless Steel Care

To preserve the finish:

• Use a soft cloth
• Use non-abrasive cleaning products
• Avoid steel wool
• Avoid harsh chlorinated cleaners
• Rinse thoroughly
• Dry after cleaning
• Wipe in the direction of the finish where practical

Regular care will help maintain both appearance and hygiene.

Important Notes

• Use clean cold water only.
• Recommended inlet pressure is 15 to 60psi.
• An inline regulator may be required for mains water.
• A drain hose and additional fittings may be required.
• Confirm tubing sizes before installation.
• The tray includes a 6.35mm water inlet.
• The tray includes a 12.7mm drain outlet.
• A plumber may be required for permanent connections.
• The rinser does not replace proper glass washing.
• Check all connections for leaks before regular use.

Glass Rinsing Drip Tray 460mm x 180mm is an excellent addition to any draught system where better glass preparation, cleaner service and professional presentation are priorities. Its push-activated rinser, built-in drainage and durable 304 stainless steel construction make it suitable for home bars, kegerators and custom dispensing systems.