Triple Tap Font Kit- No Tap or Disconnect

Triple Tap Font Kit is a convenient three-line draught tower designed for brewers and bar owners who want the freedom to choose their own taps and keg connections. The font arrives with stainless steel short shanks and beverage lines already installed, reducing setup time and simplifying the construction of a multi-keg dispensing system.

This package is suitable for home kegerators, custom bars, beer fridges and selected hospitality installations. Once mounted, simply attach compatible taps to the shanks and connect the beverage lines to your chosen keg couplers or disconnects.

Taps, liquid disconnects, gas disconnects and keg couplers are not included.

Pre-Assembled for Faster Setup

The supplied short shanks and beverage lines are already fitted to the font.

This removes several time-consuming installation steps and offers:

• Faster system assembly
• Neater internal line routing
• Less difficulty accessing the inside of the font
• Consistent beverage line installation
• Easier connection to your chosen hardware
• Reduced setup work for first-time keggers

You can select the taps and keg fittings that best suit your equipment rather than being limited to a fixed package.

Three-Tap Draught System

The Triple Tap Font Kit provides three independent beverage outlets.

It can be used to serve combinations such as:

• Lager, pale ale and IPA
• Beer, cider and ginger beer
• Two beers and sparkling water
• Three rotating homebrew batches
• Alcoholic and non-alcoholic beverages
• Commercial and homebrew keg options

Each drink may require different gas pressure, carbonation and line-balancing settings.

Stainless Steel I-Style Font

The font uses a clean stainless steel I-style tower designed for compact kegerator and bench-mounted installations.

The font includes three 22mm holes for the supplied shanks.

Its stainless steel construction provides:

• A professional appearance
• Good resistance to moisture
• Easy external cleaning
• Compatibility with many home bar finishes
• Durable construction for regular use

Clean the exterior with a soft cloth and a suitable stainless steel cleaner. Avoid abrasive pads that may scratch the surface.

Pre-Fitted Stainless Steel Short Shanks

Three stainless steel short shanks are supplied and installed.

The shanks include collars and are designed to suit many common beer taps.

Before selecting taps, confirm:

• Thread compatibility
• Tap collar requirements
• Available handle clearance
• Whether any adaptors are needed
• Suitability for the beverages being served

Do not force an incompatible tap onto the shank.

Pre-Attached Beverage Lines

Each short shank includes approximately 2 metres of 4mm internal-diameter beer line.

The included line length provides a useful starting point for balancing many draught systems.

Beverage line length helps control:

• Pour speed
• Foam
• Pressure resistance
• Carbonation retention
• Overall serving performance

Do not shorten the lines until the system has been fully chilled and tested at its normal serving pressure.

Lines that are too short may cause fast and excessively foamy pours.

Choose Your Own Taps

Taps are not included, allowing you to customise the finished font.

Compatible options may include:

• Stainless steel forward-sealing taps
• Flow-control taps
• Black powder-coated taps
• Standard beer faucets
• Suitable stout taps
• Other compatible beverage taps

This flexibility is useful when matching an existing bar design or selecting taps for different beverage types.

Choose Your Keg Connections

Disconnects and keg couplers are also sold separately.

Depending on your keg type, you may need:

• Ball lock liquid disconnects
• Ball lock gas disconnects
• Pin lock fittings
• Commercial keg couplers
• Push-in fittings
• Threaded adaptors
• Clamps or compatible connectors

Corny kegs generally use separate gas and liquid disconnects, while commercial kegs often require a specific coupler style.

Check your keg before choosing fittings.

Additional Gas Line Included

The kit includes additional tubing that can be used to connect a gas regulator to the keg system.

A complete gas setup may also require:

• CO₂ cylinder
• Gas regulator
• Gas disconnects or couplers
• Gas splitters
• Manifold
• Non-return valves
• Secondary regulator
• Compatible push-in fittings

These parts are not included unless stated separately.

What Is Included

The kit includes:

• 1 x stainless steel I-style triple-tap font
• 3 x 22mm tap holes
• 3 x pre-fitted stainless steel short shanks
• 3 x collars
• Approximately 2m of 4mm ID beverage line per shank
• 1 x rubber font gasket
• 1 x tap installation tool
• Screws and nuts for mounting
• Additional gas line

What Is Not Included

The following items are not included:

• Beer taps
• Tap handles, unless supplied with your chosen tap
• Liquid disconnects
• Gas disconnects
• Keg couplers
• CO₂ cylinder
• Gas regulator
• Kegs
• Drip tray
• Additional gas-distribution equipment

Make sure the final product listing clearly states these exclusions.

General Installation

A typical installation process includes:

1. Select a suitable mounting position.
2. Confirm there are no hidden cooling lines, wiring or structural obstructions.
3. Place the rubber gasket beneath the font.
4. Feed the beverage and gas lines through the mounting opening.
5. Secure the font using the supplied screws and nuts.
6. Attach compatible taps to the short shanks.
7. Tighten the taps with the included tool.
8. Connect the beer lines to the chosen couplers or disconnects.
9. Complete the gas system.
10. Check all beverage and gas connections.
11. Chill and pressure the kegs.
12. Test and balance each tap.

Follow the manufacturer’s instructions and use suitable tools.

Mounting to a Kegerator

When installing the font on a kegerator:

• Use the approved mounting area
• Check the existing hole pattern
• Avoid hidden refrigeration components
• Confirm drip-tray alignment
• Allow adequate glass clearance
• Make sure the font remains level
• Check that beverage lines are not kinked

Drilling into an unapproved area may damage the refrigeration system.

Mounting to a Bench

For bench installation:

• Check that the surface can support the font
• Confirm there is enough access underneath
• Use suitable mounting hardware
• Plan the beverage and gas line route
• Seal exposed bench material if required
• Allow room for servicing and cleaning

A professional installer may be appropriate for permanent hospitality applications.

Balancing the Beverage Lines

A balanced draught system provides a steady pour with controlled foam.

Performance depends on:

• Beverage temperature
• Serving pressure
• Carbonation level
• Beverage line length
• Internal line diameter
• Tap height
• Tap type
• Beverage style

The supplied 2m lines should be tested before trimming.

Shorten only in small amounts if needed.

Gas Distribution for Three Kegs

Serving three kegs from one gas source may require a splitter or manifold.

A basic system may use one pressure for all kegs. However, different beverages may require different settings.

For example:

• Sparkling water may require higher pressure
• A lightly carbonated ale may use lower pressure
• Cider may require a different carbonation level from beer

Secondary regulators or inline pressure-control devices may be required when serving drinks at different pressures.

Cleaning and Sanitation

Clean all beverage-contact parts before first use.

Clean the font, shanks and lines:

• After each keg
• Between different beverages
• After serving sweet drinks
• Before extended storage
• Whenever flavour changes
• If flow becomes restricted

Use a suitable beer line cleaner and follow the correct dilution and contact time.

Inspect:

• Beverage tubing
• Shank seals
• Tap connections
• Gas line
• Mounting hardware
• Rubber gasket
• Couplers or disconnects

Replace worn or leaking parts promptly.

Ideal For

The Triple Tap Font Kit is suitable for:

• Home kegerators
• Custom beer fridges
• Home bars
• Keezer conversions
• Garages and entertainment spaces
• Small hospitality installations
• Multi-keg homebrew systems
• Brewers who want custom tap choices

Its pre-assembled shanks and lines make it a useful foundation for a personalised three-tap draught setup.

Important Notes

• Taps are not included.
• Liquid and gas disconnects are not included.
• Keg couplers are not included.
• Confirm tap and shank compatibility.
• Confirm keg connection type before ordering fittings.
• CO₂ cylinder and regulator are sold separately.
• Additional gas-distribution parts may be required.
• Do not shorten beer lines before testing.
• Check for hidden refrigeration lines before drilling.
• Clean and sanitise all beverage-contact parts before use.

Triple Tap Font Kit offers a simple way to build a customised three-tap keg system without installing every shank and beverage line from scratch. Its stainless steel construction, pre-fitted lines and included mounting accessories make it a practical option for home and hospitality draught setups.