Black Phantom Double Tap Stainless Font Only is a stylish twin-tap beer tower designed for brewers who want a clean, modern look for their kegerator or home bar. Its matte black finish creates a minimalist appearance that pairs especially well with Series X Kegerators and black-themed draught systems.

The font is made from stainless steel and includes internal closed-cell foam insulation. This insulation helps reduce heat entering the font and surrounding beverage lines, which can improve first-pour performance when the tower is properly air cooled.

This listing is for the font only. Taps, shanks, beverage lines, mounting hardware and other dispensing components are not included unless stated separately.

Sleek Matte Black Finish

The matte black exterior gives the font a bold and modern appearance.

It works well with:

• Series X Kegerators
• Black beer taps
• Minimalist home bars
• Keezer builds
• Stainless and timber bar surfaces
• Custom draught systems
• Entertainment areas

The dark finish creates a strong visual contrast against stainless steel taps and fittings.

Double Tap Configuration

The font is designed to support two tap positions.

This makes it suitable for serving combinations such as:

• Lager and pale ale
• Beer and cider
• IPA and stout
• Beer and sparkling water
• Two homebrew recipes
• Alcoholic and non-alcoholic beverages

The final setup depends on the taps, shanks, lines and gas equipment selected separately.

Stainless Steel Construction

The Black Phantom Double Tap Stainless Font Only uses a stainless steel body beneath the matte black finish.

This provides:

• Durable construction
• Good corrosion resistance
• Long service life
• A strong base for tap installation
• Compatibility with many home draught systems

Stainless steel also helps the font maintain its shape and strength under regular use.

Internal Closed-Cell Foam Insulation

The font includes internal closed-cell insulation foam.

This foam fits closely inside the tower and helps reduce heat ingress around the beer lines.

Potential benefits include:

• Reduced warming inside the font
• Better first-pour performance
• Less foam caused by warm beverage lines
• Improved temperature stability
• Better compatibility with font cooling systems

Insulation alone will not fully cool the tower. For best results, use a suitable font fan kit where required.

Suitable for Air Cooling

The font is designed for air cooling rather than glycol flooding.

A font fan can circulate cold air from the kegerator cabinet through the tower.

This may help:

• Keep beverage lines colder
• Reduce warm first pours
• Improve foam control
• Maintain more consistent serving temperature
• Reduce temperature differences between the keg and tap

The font fan kit is sold separately.

Ideal for Series X Kegerators

This font is particularly well suited to compatible Series X Kegerators.

Before installation, confirm:

• Mounting-hole compatibility
• Base collar clearance
• Tap spacing
• Drip tray alignment
• Beverage line routing
• Internal cooling access

Compatibility may vary between models and custom installations.

Product Specifications

• Height: 320mm without taps
• Font diameter: 78mm
• Base collar diameter: 111mm
• Internal insulation: Closed-cell foam
• Finish: Matte black
• Construction: Stainless steel
• Tap positions: Two

Measure the intended installation area before ordering.

Font Only

This listing includes:

• 1 x black double tap stainless steel font
• Internal closed-cell foam insulation

The following items are not included unless specifically stated:

• Beer taps
• Tap handles
• Tap shanks
• Beverage lines
• Disconnects
• Gas fittings
• Mounting hardware
• Drip tray
• Font fan kit

This makes the font a flexible option for users who want to choose their own taps and fittings.

Tap and Shank Compatibility

Compatible taps and shanks must be selected separately.

Possible options may include:

• Forward-sealing taps
• Flow-control taps
• Stainless steel taps
• Black powder-coated taps
• Compatible short shanks
• Push-in shank systems

Confirm thread and mounting compatibility before purchase.

General Installation

A typical installation process may include:

1. Confirm the font mounting position.
2. Check the surface for hidden cooling lines or wiring.
3. Prepare the mounting opening.
4. Feed beverage lines through the tower.
5. Install the selected shanks.
6. Fit the chosen taps.
7. Secure the font to the mounting surface.
8. Connect the beverage lines.
9. Install the air-cooling tube if used.
10. Check all fittings.
11. Test the system under pressure.

Follow the kegerator and font manufacturer’s instructions.

Mounting Considerations

Before drilling or modifying a kegerator:

• Confirm the approved mounting area
• Check for refrigeration lines
• Verify the base collar diameter
• Confirm the font will sit level
• Check drip tray alignment
• Allow enough handle clearance
• Plan beverage line routing

Improper drilling can damage the appliance.

Improving First-Pour Performance

To reduce first-pour foam:

• Keep the keg fully chilled
• Use a font fan
• Keep beverage lines insulated
• Balance the beer line length
• Use the correct serving pressure
• Avoid direct sunlight
• Keep the taps clean
• Allow the font to cool before pouring

Warm taps and lines are a common cause of foam during the first pour.

Cleaning the Exterior

The matte black finish requires careful cleaning.

Use:

• A soft microfibre cloth
• Mild detergent
• Warm water
• Non-abrasive cleaning products

Avoid:

• Steel wool
• Scouring pads
• Abrasive powders
• Sharp tools
• Harsh solvents

Dry the surface after cleaning to reduce marks.

Scratch Warning

The black surface may show scratches more clearly than a brushed stainless steel finish.

Handle the font carefully during:

• Unpacking
• Installation
• Tap fitting
• Cleaning
• Transport
• Storage

Protect the finish from metal tools and rough surfaces.

Use a cloth between tools and the font where practical.

Suitable Applications

The font is ideal for:

• Series X Kegerators
• Home bars
• Double tap draught systems
• Custom kegerators
• Keezer builds
• Garage bars
• Games rooms
• Alfresco serving areas

Its compact dimensions and matte black appearance make it a strong choice for modern installations.

Important Notes

• This listing is for the font only.
• Taps are not included.
• Shanks are not included.
• Beverage lines are not included.
• Mounting hardware may be sold separately.
• Font fan kit is sold separately.
• Designed for air cooling.
• Handle carefully to avoid scratches.
• Confirm compatibility before installation.
• Clean with non-abrasive products only.

Black Phantom Double Tap Stainless Font Only is a premium-looking foundation for a customised two-tap draught system. Its stainless steel construction, internal insulation and matte black finish make it an excellent upgrade for Series X Kegerators, home bars and modern beer dispensing setups.