Auto-Close Spring for UltraTap and Intertap Beer Taps is a simple stainless steel accessory designed to make compatible beer faucets automatically return to the closed position when the handle is released.

It is a practical upgrade for home kegerators, shared bars, party setups and other draught systems where a tap may accidentally be left partly open. By helping the faucet close automatically, the spring may reduce beer loss, sticky floors and unnecessary mess.

This product is the spring only. A compatible beer tap, tap handle and shank are required to create a complete dispensing setup.

Compatible Beer Faucets

The spring is designed for use with:

• UltraTap SS faucets
• Intertap PC faucets
• Intertap SS faucets

It is not compatible with:

• Intertap Flow Control models
• Other faucet brands unless specifically confirmed
• Taps with incompatible internal shuttle or shank designs

Always confirm the exact faucet model before purchase.

Automatic Self-Closing Operation

Once installed, the spring applies return pressure to the faucet shuttle.

When the tap handle is released, the spring helps move the faucet back into the closed position.

This can be especially useful in:

• Home bars
• Party kegerators
• Shared accommodation
• Clubrooms
• Event setups
• Busy serving areas
• Outdoor draught systems

The spring does not replace normal supervision, but it adds an extra level of protection against accidental spills.

Helps Reduce Beer Waste

A tap that remains slightly open can empty a keg surprisingly quickly.

The Auto-Close Spring for UltraTap and Intertap Beer Taps helps reduce this risk by encouraging the faucet to close immediately after each pour.

Potential benefits include:

• Less accidental beer loss
• Reduced dripping
• Cleaner floors and drip trays
• Lower chance of unattended pouring
• More consistent tap operation
• Improved convenience for guests

The faucet should still be checked regularly to make sure it seals correctly.

Stainless Steel Construction

The spring is made from stainless steel for durability and reliable repeated movement.

Stainless steel provides:

• Good corrosion resistance
• Strong spring tension
• Suitability for draught environments
• Long service life
• Easy maintenance
• Resistance to normal moisture exposure

Keep the spring clean and dry when servicing the faucet.

Installation Position

The spring fits between the tap shank and the internal shuttle of the compatible faucet.

A general installation process includes:

1. Turn off the gas supply.
2. Release pressure from the beverage system.
3. Remove the faucet from the shank.
4. Clean the faucet and shank connection.
5. Position the spring between the shank and shuttle.
6. Refit the faucet.
7. Tighten the collar securely.
8. Test the handle movement.
9. Restore pressure.
10. Check that the tap closes fully after release.

Installation may vary slightly depending on the faucet model.

Test After Installation

After fitting the spring:

• Pull the handle forward
• Release it completely
• Confirm the faucet returns to the closed position
• Check for dripping
• Test several pours
• Make sure the handle is not binding
• Confirm the tap still opens smoothly

If the faucet does not close properly, remove the spring and inspect the installation.

Changes to Tap Feel

An auto-close spring increases resistance at the handle.

Customers should expect:

• Firmer tap movement
• Automatic handle return
• Slightly more force required to pour
• Immediate closure when the handle is released

This is normal and part of the self-closing function.

Suitable for Party and Shared Systems

The spring is particularly useful where several people may operate the tap.

It can help reduce mistakes caused by:

• Inexperienced users
• Handles not being pushed fully closed
• Busy serving conditions
• Accidental bumps
• Guests walking away before checking the faucet

It is a low-cost upgrade that can help protect an entire keg from accidental loss.

Cleaning and Maintenance

Inspect the spring whenever the faucet is disassembled for cleaning.

Check for:

• Corrosion
• Distortion
• Loss of tension
• Beverage residue
• Damage
• Incorrect seating

Clean it using a suitable brewery cleaner and rinse according to the cleaner instructions.

Do not stretch or bend the spring unnecessarily.

Faucet Cleaning

The faucet should still be cleaned regularly.

A general maintenance routine includes:

1. Release all pressure.
2. Remove the faucet.
3. Disassemble compatible parts.
4. Clean with correctly diluted beer line cleaner.
5. Rinse where required.
6. Inspect the shuttle, seals and spring.
7. Sanitise before reassembly.
8. Refit and leak-test.

The spring does not reduce the need for normal tap servicing.

Items Required for a Complete Setup

This listing includes one stainless steel spring only.

You will also need:

• Compatible UltraTap or Intertap faucet
• Tap handle
• Tap shank
• Beer line
• Beverage connector
• Keg
• Gas equipment

These items are sold separately unless stated otherwise.

Important Compatibility Note

This spring does not fit Intertap Flow Control faucets.

Flow Control models use a different internal configuration, so the spring may interfere with normal faucet operation.

Do not attempt to force it into an incompatible tap.

Important Notes

• Spring only
• Compatible with UltraTap SS
• Compatible with Intertap PC
• Compatible with Intertap SS
• Not compatible with Intertap Flow Control models
• Tap, handle and shank are sold separately
• Installation requires the faucet to be removed from the shank
• Test the closing action before normal use
• Clean during regular faucet maintenance
• Do not use if bent, damaged or corroded

Auto-Close Spring for UltraTap and Intertap Beer Taps is a simple upgrade that adds automatic closing to compatible faucets. Its stainless steel construction and easy installation make it a practical accessory for home bars, party kegerators and shared draught systems.